Dual Boot Vista64/XP32 with separate Raid 0 for storage
I will be building a new computer this weekend and would like some help on how to configure a dual boot of Vista 64 and ...
Raid Monitor Question
Hi,I have an HP laptop running Vista Home premium and every now and then I get a Zone Alarm popup about raid Monitor wa...
Re: How to restore RAID-5 array
You'll probably have to find a forum or newsgroup that deals with Gigabyte motherboards to get help with this.http://ww...
RAID array degraded - "missing hard drive"
Hi guys,I have an Intel raid array on my PC with 3 750Gb physical drives. I have checked all the connections in the box...
Drive with RAID 1 access denied.
I use raid 1 by Gigabyte Mainboard GA-965P-DS3 in Vista x64 Ultimate. Sometime I can't do any thing with raid drive: mod...
Vista64- Move OS from Raid Array to New Boot Drive
Hello All.I've been wrestling with these problems for three months, so I'll try to keep it simple. I'm sure that I've o...
Installing vista on raid 0
When do I need to give the driver for the array ? Will the installation ask for it or do I need to press a key like xp ?...
Raid 1
How do I increase the size of my hardrive in a raid 1 system? JohnL...
Unable to load RAID drivers while booting
Hello,I've installed Vista x64 on my PC with a Highpoint Rocketraid 2310 controller. Whle installing Windows, I provided...
how to add 1,5gb storage hdd to pc separate from raid 0
My Dell PC has raid 0 controller and I wish to add a separate hdd to my pc just for storage. I know I have to go to the ...
Raid 0
What is raid 0? What happens if i set it to 0? ( Will i get more performance? ) Where can i set it to 0? Is there a tuto...
Raid drives not seen when third drive is added
I have been able to install vista ultimate 64 to a mirrored raid drive setup. On the bios - asus m2npv-vm (nvidia) - I h...
Access to Raid drive on Vista network
Hi allI have 2 Vista PC's on a small network hardwired through a Belkin Wireless router. One is a desktop running Vista...
Non-Raid to Raid0 in Vista 64
Hi,I'm trying to change my system from non-raid to raid0 with no luck. Here is what I have done:Made image of disk usin...
Software RAID 5 capabilities
I want to purchase 4 1 TB disks to be used as DVD storage on my Vista 64 machine. I want to basically rip all my DVD's t...
The Dangers of RAID and Vista
Two weeks ago, I purchased two WD Black Caviar 1TB drives after the third (count them) Maxtor external drive gave out o...
Win 7 RAID, Server AV, mobile profiles... Questions...
I have a few questions and I don't see any groups that refer to Windows 7, or that are relevant to my roaming profile q...
1st Raid Card Install, Need jump Start...
Hi Folks, My System config will be listed below.I have ran on board raid and need advise or pointers to get me going wit...
Is RAID worth it?
I was just about to install a larger C: drive on my PC which was configured as raid0 (there are also two other HDD's fo...
Migrating Raid 0 across installs
Here's what happened: I had a PC set up with a raid 0 in vista that was not the boot drive. I was using the raid 0 arr...
RAID 1 instructions needed
I have a HP m8430f (Intel Core Quad/2.40GHz/4GB/Vista Home Premium x64) and need detailed instructions on how to set-up ...
Vista 64 Home Premium Installation on RAID
I know that this has been dealt with before and I've followed the useful John Barnett tutorial without success.Brief his...
Defragging a RAID drive
How do I defrag my raid drive?Thanx...
RAID-0 XP 32bit Upgrade to Vista 64bit Ultimate
I am attempting to install a raid-0 setup. I have an Asus A8N-SLI Premium & 2 Seagate 320gb HDD's. I have the Upgrad...
cant install intel raid drivers on vista
Hi,Ive got a vista home premium pc. Im trying to setup a raid 5 with three extra drives.Intel 965 chipset.Ive tried to i...
Re: Install SATA/RAID controler after Vista installed?
The answer is no. I have just been through the same issue and spent ages. Intel agents assured me it carn't be done unle...
Raid Help
Hello.I just installed Vista Ultimate X64 edition and I have 1 working raid 2x500gb Seagates and I also have 2X not work...
Blue screen on boot after new raid array
i recently decided to go with a raid array for my file storage on my desktop. i originally just had 3 hard drives, one b...
SATA 150 or 300 or RAID - Need Help.
I am running Ultimate on a Pentium D w/2meg and Ready Boost with a Seagate 7200 16 MB Cache on an Intel ICH7R/DH SATA ...
How to restore RAID-5 array
Hi!I am stuck and I do not know how to go on to fix this problem: My computers raid 5 array had one drive crash and I ca...
Regress from "RAID-Ready" or AHCI to IDE
Is there some way to regress, revert, or go back from a "raid-Ready" or even AHCI setup to a plain old IDE se...
Raid problem
I have an Acer laptop running Vista Ultimate that contains 2 identical hard drives. When the laptop was purchased, the ...
Silicon Image SiI 0680 Ultra-133 Medley ATA Raid Controller
Hi all, new to the forums :)I have been fighting with my PCI IDE raid card. I have it set up as raid, I have been throug...
install doesn't see sata-raid drivers
I am attempting a new build with Vista x64 sp1.When I get to the install screen part where to put the OS, no HD is found...
windows 2008 server on a scsi raid 29160
im trying to put my hardrives as one. raid 0or stringging the same type of hard drivesi know i need the bios for this op...
HP Raid 1 ML Series
Hello I'm completely inexperienced using raid 1 on HP ML110 G3. I did follow HP's instructions on BIOS setting IDE to Ra...
System Recovery to RAID volume
Vista x64 UltimateI have a raid 0 with 2x Velociraptors for OS and programs etcHave another raid 5 with 3x 1.5 TB drives...
reinstal from raid 0 to single drive
I have Vista x64 Ultimate installed on raid 0 and complete backup made with Windows backup utility on a different drive ...
"Injecting" RAID into a functioning Vista build
Hello, all.I have a current Vista Home Premium (32-bit) build. I have 4 WD 160GB SATA drives, non-raid. I also have a...
What is a hard drive RAID configuration
i have been thinking of upgrading my system and i am going to get a new MOBO and other internal hardware.. i have heard ...
raid 0 "error occured"
What is this ? I run chkdsk and found no problem. I marked the disk as normal using Intel storage manager and it runs f...
Raid 1 Array
So I currently have a Vista Business 64-bit. I also have 2 1tb drives. I have one of the terrabyte drives with vista on ...
sharing a RAID drive problem
Hi everyone,Since I have vista64 I have a problem that I have identified to be related to raid drives, I.E :When I share...
single SATA to Raid 1
I've just received my Dell Optiplex 755 with Vista Ultimate and 2x250 SATA drives. I asked Dell to configure the 2 disk...
Setting up Vista on a Sil3x12 RAID - please help.
Hi,This is my first post here but as I'm just about to start delving into Vista I doubt it will be my last (by any means...
Raid install
Having problems installing a raid across 4 1TB hard drives. I have it configured in the bios. Trying to do raid 5 but ha...
HHow to move Vista 64 to a Raid w/o re-installing
It took a few days, but I was able to move my installation from a SATA drive to a new raid Array. Without re-installing ...
SATA & RAID installations
My Windows Vista Ultimate 64bit PC originally had two 80gig SATA drives configured as raid0. I replaced those drives wi...
opk and raid drivers
I wish to install Vista Ultimate to an Asus p5e3 motherboard using 0PK (for the first time) . I want to set up two SAT...
Vista and RAID 10 - problem
Hello,I have a Vista Home Premium x64 installed on raid 0+1 Matrix. Some day I had to reset the system because the syste...
Raid Critical Errors
A few weeks ago Vista started to report critical raid errors. My main drive was a couple of Maxtor drives put together ...
Raid Mirror Drive Failure
First, my appologies: I tried a HW group first with this question with no response. I know some folks here are knowleda...
How to setup IDE software RAID 0?
I posted in another thread with a similar topic. In that thread i got my SATA drives setup in a raid 0 configuration. ...
VIA RAID 0 not recognized
Strange things are happening here. :) I have plugged 2 of my SATA drives into my motherboard and windows vista 32 insta...
Can I create some sort of raid disk with two usb drives in
Hi,I want to have two flash drives working in like a raid mirror.I can plug in one of the usb flash drives and get say a...
Can Vista access XP software raid stripe partition ?
HiI am planning a dual boot vista / xp system with twin 250gb hard disksIn XP I will use the trick on toms hardware to e...
New Comp, Vista Ult 64bit, Startup SATA/RAID HD not found
I know you guys get this question alot, but after searching through the forum posts and trying the various methods, stil...
Need help setting up RAID 1
Hello everyone,Noob person needs help setting up raid 1. I have the following hardware and I would like some help in tur...
help with raid on sas
BUILT THIS SYSTEM WITH THESE SPECSHERE ARE MY SPECS:CPU: AMD ATHLON 6400 WINDSORM/B: K9A2 PLATINUMRAM: CORSAIR XMS2 DHX ...
SCSI/RAID Host Controller not working
*need help for update* hi gays how r u alli need yours help to update my vista home basic hardware.....SCSI/raid Host C...
RAID 1 Setup /Vista Installation Hangs
I just flashed the BIOS with the latest version, then deleted the partitions created by Acronis. I then deleted the raid...
RAID 1 after first drive Installation
MB P5DWH; Vista Ultimate; Hitachi DeskStar 300 GB.ANyone knows if its posible to "raid 2" on an Intel motherbo...
Transferring a RAID 0 volume
A query for those who've done this before:I have a two-disk raid 0 volume running off an Nvidia driver with no Windows...
Raid controller and Vista ??
Hi, I have Dell Dimension 8400 that uses Intel 82801FR Sata raid controller. I wanted to do a clean install of Vista Ul...
Vista and Raid 0
I am trying to install Vista on a raid 0 but it won't go. While I was able to set up two identical drives in BIOS as RAI...